A Comprehensive Guide to Bird Spike Installation

As beautiful and often helpful as birds are, they can wreak havoc when they decide to roost or nest in places where they are not wanted. Issues resulting from the bird’s droppings, noise, and other vandalism can easily necessitate expensive repairs and lead to depreciation of the property. One recommendation on how to keep these pesky birds away is through the use of bird spikes installations. This guide will take you through the whole bird spike installation process and enable you to safeguard your premises appropriately.

Bird Spikes, What Are They?

Bird spikes are a versatile solution that is not only effective, but also non-lethal, to birds that can settle themselves unfavourably. These spikes are made of rust proof materials such as, stainless steel or plastic and are aimed at discouraging birds from settling on ledges, roofs and similar structures by providing an irritating landing area. When installed properly, bird spikes also do not cause any harm to the birds and provide relief for a longer term, thus, giving homeowners and business owners the option to install them.

Bird Spikes Installation: Things to Consider

Selecting and fitting the appropriate species of bird spikes in dubai prior to beginning the installation process is of considerable importance. The variety of bird spikes is as follows:

Stainless Steel Spikes: These are corrosion resistant and very strong and therefore excellent for outdoor use. They are also suitable for use against a wide range of bird species.

Plastic Spikes: These are cheaper than the stainless steel variety, lightweight, and easy to install but their durability under harsh weather conditions may be lower.

Hybrid Spikes: There are products that use a combination of plastic and stainless steel for their production.

In bird spikes selection, consider the types of birds present, factors determining the surface to be installed as well as budgetary constraints. Finally, consider the range of size of the spike based on its width which will provide better stability and installation.

Safety goggles and gloves or sungla

A utility knife or scissors (only for cutting the spikes when required) 

Ladder (needed for high places)

Organising all these tools and materials in advance will facilitate the process in that it will be less time consuming with minimal complication and disorder.

The Procedure for Installing the Fixture in Detail 

Measure and Mark the Area 

As the first step, identify the places to put the bird spikes. Some of the most common sites for this are rooftops, windowsills, ledges and eaves. A measuring stick can be used for determining the length of the installation area and the perimeter where the bird spikes will be fixed is marked on the wall. It is important to ensure the surfaces where the spots are to be marked are clean to remove dust and other elements that may interfere with the adhesion of the spots to be marked.

Surface Area Needs Attention

Prepare the area of placing hundred spikes carefully. Remove bird droppings, dirt, or dust from the substrate using a scrub brush or a pressure washer. Determining the thickness of the adhesive layer depends on such surface preparation. It is important to let the surface dry before you continue on to the next stage.

 The Use of an Adhesive

From a caulking gun, expel a bead of adhesive along the marked line that is wide enough to hold the weight of the added spikes. The glue is required also to be spread over a wider crease as the target area. Along these lines, it may be sensible to smear glue on both the base of the spikes and on the target area to facilitate contact.

The Placement of The Bird Spikes

Use bird spikes to place over the adhesive that has been applied on the surface area of the targeting zone. Make sure that they are positioned along the edge of the surface which has been marked and pressed down securely to the adhesive. Should the spikes prove to be excessively long then it would be necessary to truncate the polymeric ones. This task may be executed with best results if precedents provided by manufacturer’s specifications are observed.

 Secure with Additional Fasteners (Optional)

When the installation area is exposed and high levels of wind or heavy rain is expected, using screws or ties can be recommended to improve security features. This is particularly relevant for large installations in which the applicator spikes may undergo greater mechanical stress.

Let the Adhesive Set

When the bird spikes have been fitted, it is recommended that the installer waits for the building adhesive to cure, for the duration that is advised by the manufacturer. This time frame is usually between one to two days. The spikes must be allowed time to dry undisturbed.

Routine Maintenance

After the spikes have been installed, they should be checked periodically, in order to confirm that they are still in place and working properly. If other steps have been taken and the birds’ nests, droppings or other debris that leads to their reproduction have not been cleaned, they will continue to seek the area around the spikes in order to nest. In cases when some of the spikes are missing, these should be glued back into position or secured with mechanical fasteners.

Conclusion 

Protecting your property from birds can be achieved by putting up bird spikes which is one of the most successful measures especially for areas that are characterised by the presence of such birds. It is necessary to become familiar with commonplace viewpoints of birds and know which bird spikes to choose in order to effectively shield certain locations from nesting and roosting in the first place. Proper installation and periodic usage checks will help to keep the spikes in use. In case you want the peace of mind that comes with effective pest management practice, do not hesitate, initiate the right measures to guard your business or home from the negative impacts of geese or pigeons.

Leave a Reply

Your email address will not be published. Required fields are marked *